Fire drill evacuation stage

The drill starts with the alarm bell and smoke grenades. At the beginning of the drill, all departments gather quickly and cover their mouths and noses with paper towels

Fire drill assembly and drill

All departments complete assembly and head count

Fire drill rescue explanation stage

Work-related injury dressing and rescue drill

Fire drill chemical spill drill

After the occurrence of chemical leakage accident, the corresponding protective articles should be found first, and the source of leakage should be found in time. After plugging the source of leakage, fire sand, foam and cloth should be used to adsorb the leaked chemicals. After the completion of adsorption, the contaminated adsorbents should be cleaned up

Instructions on the use of dry powder fire extinguishers

Usage of dry powder fire extinguisher:
1. Lift the fire extinguisher and run quickly to the fire
2. During running, shake the fire extinguisher upside down 2-3 times
3, 2-3 meters away from the fire point, pull out the safety pin
4. Hold the handle of the fire extinguisher in one hand and the nozzle of the fire extinguisher in the other hand. Aim at the fire source and press down the handle

Instructions and demonstration of fire hydrant use

Method of fire hydrant:
1, open or break the fire hydrant box door
2. Take out the hose
3, one end of the hose is connected to the hydrant interface, the other end is connected to the gun head
4. Pick up one end of the gun and quickly run to the fire site. When ready, signal another person to open the water valve
5. After receiving the signal, rotate the valve at a constant speed to open the water valve